Holder A4 VG 40 EP User Manual

-

Drive the tractor with the hitch in the trailer tiller.
Upon contact, the hitch closes, the towing pin (3)
goes through the eye of the tiller.

DANGER
The trailer hitch must be completely closed.

-

Connect the trailer lighting to the socket (5).

-

Remove the wheel chocks from the trailers.

-

Adjust the height of the trailer hitch (2) at the adjust-
ment rail (1) so that the trailer tiller can be attached
horizontally.

-

To adjust the height, pull the lever (6) up.

ATTENTION: The bearing load must be at least
25 kg (4 % of the trailer load), while the maximum
bearing load must not exceed 800 kg.
If the bearing load is underrun or exceeded
when unloading the trailer, the load must be
shifted so that the bearing load returns to the
permissible range.

-

Drive the tractor in front of the trailer to be attached.

DANGER: The trailer must be secured against
unintentional movement (rolling).

-

Pull the release lever (4) up until the tow pin (3) is
clear of the hitch.

DANGER
Be sure no-one is standing between the
tractor and trailer.

Bild_105

5

4

3

2

1

6