Holder A4 VG 40 EP User Manual

-

Relieve any pressure in the hydraulic system by
operating the control levers.

-

Remove the air filter housing (1) with a 24mm wrench.

ATTENTION
Observe the instructions for handling fuels
and lubricants.

-

Clean the mating surface of the filter mount.

-

Withdraw the pressure filter from the housing.

-

Clean the housing.

-

Coat the new seal with oil.

-

Insert the new pressure filter in the air filter housing.

-

Screw the air filter housing with a new seal in the filter
mount.

-

Make a trial run and check for leaks.

-

Check the hydraulic oil level.

Bild_137

1