HTC LZC6130 / 965879801 User Manual

CONTROLS

- Husqvarna

IMPORTANT INFORMATION
Experience indicates that alcohol blended

fuels (called gasohol, ethanol or methanol)

can attract moisture which leads to separation

and formation of acids during storage. Acidic

gas can damage the fuel system of an engine

while in storage. To avoid engine problems,

the fuel system should be emptied before

storage of 30 days or longer. Drain the gas

tank, start the engine and let it run until the

fuel lines and carburetor are empty. Use fresh

fuel the next season. See Storage Instructions

for additional information. Never use engine

or carburetor cleaners in the fuel tank or

permanent damage may occur.

Refueling

Read the safety instructions before refueling. The

machine has two fuel tanks, one on each side just

behind the seat. The tank capacity is 3 gallons (11.4

liters).
Regularly check the gas cap gasket for damage and

keep the cap properly tightened.
The engine will run on a minimum of 85-octane

unleaded gasoline (no oil mix). Environmentally

adapted alkylate gasoline can be used. See Technical

Data concerning ethanol fuel. Methanol fuel is not

allowed. Do not use E85 alcohol based fuel. Damage

to the engine and components may occur.
When operating in temperatures below 32° F. (0° C.),

use fresh, clean winter grade gasoline to help insure

good cold weather starting.

8011-524

Fuel tanks

WARNING!
Gasoline is highly flammable.

Observe caution and fill the tank

outdoors (see the safety instruction).

WARNING!
The engine and the exhaust system,

become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to

cool at least two (2) minutes before

refueling

WARNING!
Fill to bottom of filler neck. Do not

overfill. Wipe off any spilled oil

or fuel. Do not store, spill or use

gasoline near an open flame.