Holder C 9.92 H User Manual
C 9.92
Operating Instructions
188
153 146
Maintenance as required
ATTENTION
Carry out the services and inspections only
with the engine turned off.
Carry out the services and inspections only
with the engine turned off.
Checking the radiator, cleaning if necessary
-
Inspect the cooling fins and oil cooler for the accumu-
lation of dirt.
lation of dirt.
Cleaning with compressed air
-
Raise the platform* and secure it against accidental
lowering.
lowering.
-
Blow out any dirt from the engine compartment to the
outside.
outside.
Cleaning with cold cleaner or water jet
ATTENTION
Maximum spray pressure 60 bar, maximum
steam temperature 60 °C
Maximum spray pressure 60 bar, maximum
steam temperature 60 °C
-
Raise the dumping subframe (dump body*) and
secure it against accidental lowering.
secure it against accidental lowering.
-
Spray the oil cooler and engine with a cold cleaner
and allow it to soak in for 10 minutes.
and allow it to soak in for 10 minutes.
-
Clean the oil cooler and engine with a strong water jet.
ATTENTION
Do not aim the water jet directly at sensitive
parts such as the alternator, covering them if
necessary.
Do not aim the water jet directly at sensitive
parts such as the alternator, covering them if
necessary.
-
Run the engine warm to prevent the formation of rust.
Bild_C992H_063