HTC LZC5227 / 965879701 User Manual
CONTROLS
Husqvarna
-
25
IMPORTANT INFORMATION
To obtain an even cutting height it is important
To obtain an even cutting height it is important
that the air pressure in all four tires is the same
15 psi (1 bar).
Cutting height lift pedal
On some models, there is a deck assist lift pedal to aid
in maneuvering the deck lift.
8011-465
Lift pedal
IMPORTANT INFORMATION
Only rotate the valve ¼ to ½ turn to release the
Only rotate the valve ¼ to ½ turn to release the
system.
Tighten the valve moderately.
Do not overtighten the valve when closing.
Tighten the valve moderately.
Do not overtighten the valve when closing.
Overtightening can damage the valve seat.
Pump release valves
8011-507
Pump release valve
Pump release valves are located on the pumps. These
valves release the system so the machine may be
moved by hand when not running. Tilt the seat forward
to gain access to the valves. Use a
5
/
8
" wrench to open
the valve.