Husqvarna 96043006800 User Manual

ASSEMBLY

LABEL

TO CHECK BATTERY (See Fig. 1)

• Lift hood to raised position.
NOTE: If this battery is put into service after month and

year indicated on label (label is located between terminals)

charge battery for minimum of one hour at 6-10 amps.

(See "BATTERY" in Maintenance section of this manual

for charging instructions).
• For battery and battery cable installation see "RE-

PLACING BATTERY" in the "Service and Adjustments"

section in this manual.

Fig. 1

TO ADJUST SEAT (See Fig. 2):

• Grasp adjustment handle(A) and pull up, slide seat to

desired po si tion and release adjustment handle.

Fig. 2

Fig. 5

TO INSTALL MOWER (See Figs. 4-12)

Be sure tractor is on level surface and engage park ing brake.
• Lower attachment lift control to its lowest position.
• Turn steering wheel to the left as far as it will go and

position mower on right side of tractor with deflector

shield to the right.

NOTE: Be sure mower side suspension arms (A) are point-

ing forward before sliding mower under tractor.

02965

Fig. 4

ASSEMBLE FRONT WHEEL TO MOWER
(See Fig. 3)

• Using shoulder bolt, washer and locknut from parts

bag, as sem ble front wheel to mower as shown. Tighten

securely.

Fig. 3

• Slide mower under tractor until it is centered under

tractor.

BEFORE REMOVING TRACTOR FROM

SKID