Husqvarna LZF5227 User Manual
English
-
37
MAINTENANCE
WARNING!
Before performing any service or adjustment checklist:
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to “OFF” position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it
Before performing any service or adjustment checklist:
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to “OFF” position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it
cannot come in contact with the plug.
Maintenance
Before After
Daily
Weekly At
least
once
each
year
Maintenance interval
in hours
25
50 100 300
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
2)
In dusty
conditions, cleaning and replacement are required more often.
3)
Performed by authorized service workshop.
=
Described in this manual
u
=
Not described in this manual
u
u
u
Check/adjust throttle and choke cables
Check the condition of belts, belt pulleys, etc.
Change the engine oil
Check the condition of belts, belt pulleys, etc.
Change the engine oil
1)
Replace the engine oil filter (every 200 hours)
Clean/replace the spark plugs
Replace the fuel filter
Replace air filter (main cartridge)
Clean/replace the spark plugs
Replace the fuel filter
Replace air filter (main cartridge)
2)
(every 200 hours)
Check the caster wheels (every 200 hours)
Clean the cooling fins
Clean the cooling fins
2)
Clean fins of oil cooler (Kohler)
Check/adjust the mower deck
Change the hydraulic oil (every 300 hours)
Replace the hydraulic oil filter (every 300 hours)
Dismantle and inspect starter
Check/adjust the mower deck
Change the hydraulic oil (every 300 hours)
Replace the hydraulic oil filter (every 300 hours)
Dismantle and inspect starter
3)
(every 500 h)
Check the engine valve clearance
3)
Perform the 300-hour service
3)
Lubricate according to Lubrication Schedule
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u