Husqvarna 03002 User Manual

Page of 44
16
MAINTENANCE
LUBRICATION CHART
T
R
A
C
T
0
R
Inspect Muffler/Spark Arrester
Clean Air Filter
Change Engine Oil (with oil filter)
Replace Air Filter Paper Cartridge
Replace Spark Plug
Check Engine Oil Level
Clean Engine Cooling Fins
Clean Air Screen
1 - Change more often when operating under a heavy load or
     in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
E
N
G
I
N
E
Replace Oil Filter (If equipped)
Replace Fuel Filter
3
2
2
2
2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
1
,
1,2
2
4
Change Engine Oil (without oil filter)
1,2
maint_sch-tr
actore
.R
OS
.e
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
EVERY
SEASON
BEFORE
STORAGE
Lubrication Chart
Check Brake Operation
Check Battery Level
Check Tire Pressure
Clean Battery and Terminals
MAINTENANCE 
SCHEDULE
Check for Loose Fasteners
Check/Replace Mower Blades
Check Operator Presence & ROS Systems
Check Transaxle Cooling
Check V-Belts
Check Mower Levelness
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have 
been subjected to operator abuse or negligence.  To receive 
full value from the warranty, operator must main tain tractor 
as instructed in this manual.
Some adjustments will need to be made periodically to 
properly maintain your tractor.
At least once a season, check to see if you should make 
any of the adjustments described in the Service and 
Adjustments section of this manual.
• 
At least once a year you should replace the spark plug, 
clean or replace air filter, and check blades and belts 
for wear.  A new spark plug and clean air filter assure 
proper air-fuel mixture and help your engine run better 
and last longer.
BEFORE EACH USE
•  Check engine oil level.
•  Check brake operation.
•  Check tire pressure.
• 
Check operator presence and ROS systems for proper 
operation.
•  Check for loose fasteners.
IMPORTANT:  DO NOT OIL OR GREASE THE PIVOT POINTS 
WHICH HAVE SPECIAL NYLON BEARINGS.  VISCOUS 
LU BRI CANTS WILL ATTRACT DUST AND DIRT THAT WILL 
SHORT EN THE LIFE OF THE SELF-LU BRI CAT ING BEARINGS.  
IF YOU FEEL THEY MUST BE LU BRI CAT ED, USE ONLY A DRY, 
POW DERED GRAPHITE TYPE LU BRI CANT SPARINGLY.
  General Purpose Grease
  Refer to Maintenance “ENGINE” Section
01965
➁ 
ENGINE
 
FRONT 
WHEEL 
BEARING 
ZERK
 
STEERING 
SECTOR 
GEAR 
TEETH
 
FRONT 
WHEEL 
BEARING 
ZERK
 
SPINDLE ZERK
 
SPINDLE ZERK