Dixon 5000 Series User Manual

 

 

 

In order to achieve optimum performance when side discharging the grass clippings, please read 
and follow the tips listed below.

 

Additional information can be found in the troubleshooting guide on page 40.

 

 

1.  Set engine speed control to the wide open or full setting. 

2.  Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog the underside of the deck 

and discharge area. 

3.  If the grass is tall, place the mower deck cut height lever in the top or second notch. Initially 

overlap cutting swaths instead of a full swath with each pass. Some applications may require a 
second cutting. 

4.  Keep The Underside Of The Mower Deck Clean. Frequent removal of dried grass and dirt will 

allow the clippings to discharge correctly. 

5.  Maintain Sharp Blades Throughout The Cutting Season. 

 

 

The following grass cut heights are based on adequate moisture conditions and normal thatch 
buildup in a healthy lawn. Some locations and applications may require slightly different cut 
heights. If in doubt, consult your local lawn professional for assistance.

 

Grass Types: 

Best Cut Heights:

 

Zoysia 

2" - 2 1/2"

 

Blue Grass 

1 1/2" - 3"

 

Fescue Blends 

1 1/2" - 3"

 

St. Augustine (Mid South) 

1 1/2" - 2" 

St. Augustine (Deep South) 

3" - 4"

 

Tifton Bermuda 

1 1/2"

 

Centipede 

1 1/2" - 2"

 

Common Bermuda 

1 1/2" - 2" 

Bahia/Argentina/Pensacola 

2"

 

Page 21