Minelab Mine lab Explorer IITM User Manual
THE MINELAB EXPLORER II
53
QUICKSTART
5
Introducing Volume
Figure 5.15
Main Menu > Audio > VOLUME
The VOLUME screen of the Audio menu displays two slider
controls: MAX LIMIT and GAIN (Figure 5.15).
controls: MAX LIMIT and GAIN (Figure 5.15).
NOTE
To test sounds upon selection it is necessary to
move the coil across the target.
Max limit
Main Menu > Audio > Volume > MAX LIMIT (adjustment)
This setting is the detector’s overriding volume control. It controls
the ‘loudness’ of a signal response emitted from the detector,
much like the volume knob on a stereo system.
the ‘loudness’ of a signal response emitted from the detector,
much like the volume knob on a stereo system.
A setting of 0 instructs the detector to be completely silent.
A setting of 10 instructs the detector’s audio to operate at its
maximum level of ‘loudness’.
maximum level of ‘loudness’.
Lower settings are likely to help extend battery usage time.
AUDIO: ADJUSTING THE VOLUME
Figure 5.15 Volume adjustment screen
AUDIO: ADJUSTING THE VOLUME
Volume
It is also possible to access the
volume menu (see page 71) from the
icon shortcut of the Advanced
mode’s LEARN screen.
(Continued next page)