Minelab Mine lab Explorer IITM User Manual
THE MINELAB EXPLORER II
74
ADVANCED USE
6
www.minelab.com
tutorial
!
LEARN’S TARGET SELECTION
... continued
Figure 6.5 Adjusting size of learnt region
LEARN’S TARGET SELECTION
Phase 2: Learning and Saving the target pattern
STEP 7
Wave the search coil several times above the desired
target until the detector learns it by clearing an area on
the screen. Learn needs to ‘see’ the target consistently to
accept it for inclusion. If you have more than one target,
repeat the procedure for each one. In Figure 6.5, two
current high denomination coins have been used.
target until the detector learns it by clearing an area on
the screen. Learn needs to ‘see’ the target consistently to
accept it for inclusion. If you have more than one target,
repeat the procedure for each one. In Figure 6.5, two
current high denomination coins have been used.
STEP 8
When you have finished learning the targets, press the
shift button next to the flashing tick.
shift button next to the flashing tick.
STEP 9
Press the shift button next to the Save icon to go directly
to the SAVE DISCRIM menu. Press a button next to your
choice of option S1–S6 (for example S1 in Figure 6.6).
This will save the learnt discrimination pattern for future
use.
to the SAVE DISCRIM menu. Press a button next to your
choice of option S1–S6 (for example S1 in Figure 6.6).
This will save the learnt discrimination pattern for future
use.
STEP 10
Press the DETECT shortcut button to return to the
detect screen. SELECT DISCRIM will then use this
saved pattern as the current search pattern.
detect screen. SELECT DISCRIM will then use this
saved pattern as the current search pattern.
NOTE
For more detail on SAVE DISCRIM, turn to page 80.
Figure 6.6 Saving the newly-edited
discrimination pattern