Echo 99944200475 User Manual

  Level 1 =  Easy to do. Common tools may be required.

  Level 2 =  Moderate difficulty. Some specialized tools may be required.

 

Drive Shaft 

Grease 

1 

Every 25 hours of use 

Gear Housing 

Grease 

1 

Every 15 - 25 hours of use

Screws/Nuts/Bolts 

Inspect/Tighten/Replace 

1 

Before each use

Tools Required:   T-Wrench, Locking Tool, Needle Nose Pliers, 13 mm 

Open End Wrench

Parts Required:  POWER BLENDX

 8 oz. (P/N 91014) or Lithium 

Base Grease, Blade P/N 69601552632, split pin P/N 

90030020022

Grease gear case every 15 - 25 hours of use. Replace blade when it 

is worn shorter than 6 in. Remove blade and holders before greasing 

to prevent damage to gear and bearings.

1.  Shut engine off.

2.  Remove split pin (A).

3.  Rotate blade until holes in inner blade adapter (B) and gear box 

align.  Insert locking tool to lock PTO shaft (C).

NOTE  

Blade nut (D) is left hand thread.

4.  Remove blade nut (D) in a clockwise direction using scrench.  Re-

move outer blade adapter (E), blade (F) and inner blade adapter (B).