Husqvarna 323E User Manual

20

 – English

Below follows some general maintenance instructions. If you 
need further information please contact your service workshop.

1.   Check the starter, the 

starter cord and the return 
spring.

2.   Make sure that the 

vibration damping 
elements are not 
damaged.

3.  Clean the outside of the 

spark plug. Remove and 
check the electrode gap. 
Adjust the gap to 0.5 mm 
or change the spark plug.

4. Clean 

the 

cooling 

fi ns on 

the fl ywheel.

5. Clean 

or 

replace 

the 

spark arrest screen on the 
muffl er.

6. Clean 

the 

carburettor 

area.

7. Clean 

the 

cooling 

fi ns on 

the cylinder and check that 
the air intake in the starter 
unit is not blocked.

8.  Check that the angle gear 

is 3/4 fi lled with grease. Fill 
if necessary using special 
grease.

9. The 

fl exible drive shaft 

must be lubricated 
after every 30 hours in 
operation or more often.

1.   Clean the outside of the 

machine.

2.   Make sure the throttle 

trigger lock and the throttle 
function correctly from a 
safety point of view.

3.   Check that the stop switch 

functions.

4.   Check that the blade does 

not rotate while idling.

5.   Clean the air fi lter. Replace 

if necessary.

6.       

Check the guard for 

damage and ensure that 
it is not cracked. Replace 
the guard if it has been 
exposed to impact or is 
cracked.

7.   Check that the blade 

is undamaged and not 
cracked. Replace the 
blade if necessary.

8.   Check that the locking nut 

is tight.

9.   Check that all nuts and 

screws are tightened.