Nilfisk-Advance America P 130.1 User Manual

9

To avoid unnecessary disappointments, you should check the following before contacting the 
Nilfi sk service organisation:

Machine refuses to start 

Machine not plugged in 

Plug in machine.

 

Defective socket 

Try another socket.

 

Fuse has blown 

Replace fuse. Switch off other machines.

 

Defective extension cable 

Try without the ex ten sion cable.

Machine stops 

Fuse has blown  

Replace fuse. Switch off other machines. 

 

Incorrect mains voltage 

Check that the mains voltage corresponds to  

 

 

specifi cation on the model tag.

 

Thermal sensor activated 

Wait - the machine will start after a few  

   minutes.
 

 

WARNING! The trigger of the spray gun  

 

 

must not be activated.

Fuse blows 

Fuse too small 

Change to an installation higher than the  

 

 

amp. consumption of the machine. 

 

 

You may try without the extension cable.

Machine pulsating 

Air in inlet hose/pump 

Allow machine to run with open trigger until  

 

 

regular working pressure resumes.

 

Inadequate supply of  

Check that the water supply corresponds to  

 

mains water 

specifi cations required (see model tag) 

 

 

NB! Avoid using long, thin hoses (min 1/2")

 

Nozzle partially blocked 

Clean the nozzle (see section 4.1)

 

Water fi lter blocked 

Clean the fi lter (see section 4.2)

 

Hose kinked 

Straighten out hose.

 

High pressure hoses too long  Disconnect high pressure extension hoses  

 

 

and retry. (Extension hose max. 7 m).

Pump/spray gun is 

Contact your nearest Nilfi sk Service Centre.

leaking

Machine starts, but  

Pump/hoses or accessory 

Wait for pump/hoses or accessory to thaw.

no water comes out  frozen
 

No water supply  

Connect inlet water.

 

Water fi lter blocked 

Clean the fi lter (see section 4.2)

 

Nozzle blocked 

Clean the nozzle (see section 4.1)

Pump pressure drops 

Button for regulation of  

Adjust the button to correct working pressure.

 

pressure / water volume not 

 correctly 

adjusted

 

  

 

 

(not available on model B)

In case problems other than the above occur, please contact your local Nilfi sk distributor.

Customer Services at Penrith -  01768 868995