Black Box MPSH8-S20-120V User Manual

 

•  Service Access:  Determines whether members of this LDAP group will be 

allowed to access command mode via the serial Setup Port, via Telnet/SSH or 

via both methods.  (Default = Serial Port = On, Telnet/SSH = On.

•  Current/Power Metering:  Determines whether or not members of this LDAP 

Group will be allowed to view current, voltage and temperature readings.

Note:

5.9.8.2  Viewing LDAP Groups
If you need to examine an existing LDAP group definition, the "View LDAP Groups" 

function can be used to review the group’s parameters and Plug Access Settings.

5.9.8.3.  Modifying LDAP Groups
If you want to modify an existing LDAP Group in order to change parameters or 

plug access rights, the "Modify LDAP Group" function can be used to reconfigure 

group parameters.  To Modify an existing LDAP Group, you must access the 

Outlet Managed PDU command mode using a password that permits access to 

Administrator Level commands.  Once you have accessed the Modify LDAP Group 

menu, use the menu options to redefine parameters in the same manner that is used 

for the Add LDAP Group menu, as discussed in Section 5.9.8.1. 

Note:

5.9.8.4.  Deleting LDAP Groups
The Delete LDAP Group function is used to delete LDAP Groups that are no 

longer in use.  In order to Delete an existing LDAP Group, you must access the 

Outlet Managed PDU command mode using a password that permits access to 

Administrator Level commands.