Black Box MPSH16-D20-120V User Manual

 

•  Accept Break:  Determines whether the port will accept breaks received from 

the attached device, and pass them along to a connected port.  When enabled, 

breaks received at this port will be passed to any port this port is connected to, 

and sent to the device connected to the other port.  When disabled, breaks will 

be refused at this port.  (Default = On.)

•  Multiple Logins:  (Text Interface Only) If the Outlet Managed PDU is installed 

in an environment that does not include communication via an open network 

(local communication only), then the Multiple Logins parameter can be used to 

determine whether or not multiple users will be able to communicate with the 

unit at the same time.  If this parameter is set to "Off" then only one user will be 

allowed to communicate with the unit at a time.  (Default = On.)

5.9.2.  Network Parameters
In the Text Interface, these parameters are accessed via the Network Configuration 

menu.  In the Web Browser Interface, these parameters are found by placing the 

cursor over the "Network Configuration" link on the left hand side of the screen, and 

then clicking on the "Network Parameters" link in the resulting fly-out menu.

Note:

•  IP Address:  (Default = 192.168.168.168.)
•  Subnet Mask:  (Default = 255.255.255.0.)
•  Gateway Address:  (Default = undefined.)
•  DHCP:  Enables/Disables Dynamic Host Configuration Protocol.   When this 

option is "On", the Outlet Managed PDU will perform a DHCP request.  Note 

that in the Text Interface, the MAC address for the Outlet Managed PDU is 

listed on the Network Status Screen.  (Default = Off.)

Note: