Black Box MPSH16-D20-120V User Manual
OUTLET MANAGED PDU
72
5.9.3.1. Adding IP Addresses to the Allow and Deny Lists
To add an IP Address to the Allow or Deny list, and begin configuring the IP Security
To add an IP Address to the Allow or Deny list, and begin configuring the IP Security
feature, proceed as follows.
Notes:
• Both the Allow and Deny list can include Linux operators, wild
cards, and net/mask pairs.
• In some cases, it is not necessary to enter all four "digits" of the
IP Address. For example, if you wish to allow access to all IP
addresses that begin with "192," then you would only need to
enter "192."
addresses that begin with "192," then you would only need to
enter "192."
• The IP Security Configuration menu is only available when you
have accessed command mode using an account that permits
Administrator level commands.
Administrator level commands.
1. Access the IP Security Configuration menu. In the Text Interface, the IP
Security menu is accessed via the Network Configuration menu. In the Web
Browser Interface, the IP Security Configuration menu is accessed via the
Network Configuration flyout menu.
2. Allow List: Enter the IP Address(es) for the clients that you wish to allow.
Note that if an IP Address is found in the Allow list, the client will be allowed
to connect, and the Outlet Managed PDU will not check the Deny list.
3. Deny List: Enter the IP Address(es) for the clients that you wish to deny.
Note that if the client’s IP Address is not found in the Deny List, that client
will be allowed to connect.