American Standard 1675 Leaflet

HD-49

CADET

ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET

PRODUCT FEATURES:

Solid Brass Construction:

Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge:

Assures a lifetime of

smooth handle operation and drip-free performance.

Pressure Balancing Valve:

Maintains output

temperature in response to changes in relative hot and

cold supply pressure. Diaphragm system engineered to

eliminate cross flow and spool "thumping". Avoids failure

due to mineral deposits - ideal for use with hard water.

Adjustable Hot Limit Safety Stop:

Limits the

amount of hot water allowed to mix with cold. Reduces

the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation

and to serve as a mounting plate for thin wall installations.

Lifetime Warranty on Function and Finish.

GENERAL DESCRIPTION:

ast brass valve body. Washerless 47mm ceramic disc

valve cartridge with volume and temperature control. Hot

limit safety stop. Pressure balancing cartridge maintains

constant output temperature in response to changes in

relative hot and cold supply pressures. 1/2" female I.P.S.

inlets/outlets.

Easy

clean

showerhead

has

2.5gpm/9.5L/min. flow restrictor. Metal lever handle.

Rough-in plaster guard designed for use as thin-wall

mounting adaptor. I.P.S. diverter tub spout.

FLOW RATE*

GALLONS PER MINUT

I N L E T P R E S S U R E ( P S I )

*Flow rates shown are for mixed hot and cold.

Shower

Spout

100

1675

Pressure Balance Bath/Shower. Female I.P.S. inlets/outlets. Easy clean showerhead. I.P.S. diverter

tub spout.

Polished Chrome finish.

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

ASSE 1016

Product
Number Description

Meets the American Disabilities Act Guidelines

and

ANSI A117.1 Requirements for the

physically challenged.

MODEL NUMBER:

1675 Pressure Balance Tub and Shower Set

Easy Clean showerhead. I.P.S. diverter tub spout.

Polished Chrome finish.

1675 Shown

3-3/8"

(86mm)

3-3/8"

(86mm)

INLETS 1/2" NPT

OUTLETS

1/2" NPT

THREADED INLETS

FINISHED WALL

(102mm)

TOP OF TUB RIM

BOTTOM OF TUB

74" FOR HEAD

CLEARANCE

(188cm)

3-5/8" REF.

(92mm)

1-5/8" TO 3-1/4"

(41mm - 83mm)

18" OPTIONAL

(45,7cm)

*5-1/8" REF.

(130mm)

1/2" NPT

(12,7mm)

1/2" NPT

6-1/2"

(165mm)

3-5/8"

(92mm)

5-1/2" REF.

(140mm)

"SEE

ILLUSTRATION "

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction. Easy clean showerhead and I.P.S. diverter tub spout. Fitting shall be

equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.

Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard

Model # 1675.

OPTIONAL TO FINISHED FLOOR

USUALLY BETWEEN 65" AND 78"

(165cm - 198cm)