NuTone B704850 Leaflet

Page of 2
KEY  
 
                                 PART NUMBER
NO. 
DESCRIPTION   
B703850 
 
  B704850
  
Mirror 
   A99050348 
  
 
A99050344
  2 
Handle   
 
 
A97017873 
 
  A97017873
  3 
Shelf Bracket - Left 
3333L 
 
          
---
   
Shelf Bracket - Right 
3333R 
 
 
    
---
  4 
Shelf 
 
 
 
A98010537 
 
   
---
  5 
Track 
 
 
 
A98010546 
 
  A98010565
  6 
Bumpon   
 
 
99100485 
 
  99100485
  7 
 
 
 
 
Mounting Screw,   Mounting Screw, 
 
 
 
 
 
 
#8x1
1
/
2
”  
 
 
#8x1
1
/
2
 MODEL  
OVERALL SIZE       WALL OPENING
    NO.   
  W       H 
       W    H     D
B703850 24
5
/
8
  19
3
/
16
    4 
     23
3
/
8
   18    3
1
/
 
B704850 23
7
/
8
  19
5
/
16
   4
1
/
4
          ---    ---     ---
INSTALLATION INSTRUCTIONS
MODEL:  B703850, B704850  
RECESSED / SURFACE MOUNTED 
STEEL BATH CABINET
 
Register your product online at www.nutone.com/register
INSTALLATION of RECESSED CABINET
1. 
Carefully remove all packing material.  Place  
 
 
shelves and hardware package aside until needed.
2. 
Deteremine desired location of cabinet on wall.   
 
 
Mark wall to show wall opening size (see      
 
 
dimensions chart).  Generally, the recommended  
 
 
height to the center of the cabinet is 64” from the  
 
 
fl oor.  Fig. 1
3. 
CAUTION:  Wall studs, plumbing or electrical lines    
 
that interfere must be removed or relocated.  Cut  
 
 
wall opening, being careful not to damage the  
 
 
surrounding wall surface.  Insert framing to support    
 
all plaster board edges.
4. 
Insert cabinet into wall opening in plumb and      
 
 
centered position.  Use a carpenter’s level and  
 
 
shim corners of cabinet if necessary.  Secure to  
 
 
wall studs through the 4 mounting holes inside  
 
 
cabinet (screws provided).
INSTALLATION of SURFACE MOUNT CABINET
1. 
Position cabinet on wall, making sure it is level.
2. 
Mark mounting hole locations through back of   
 
 
cabinet and onto wall material.  Set cabinet aside.     
 
Pre-drill mounting holes if necessary.
3. 
Re-position cabinet and secure it to wall studs through 
 
mounting holes in rear of cabinet.  Use four screws    
 
(provided).  If studs are not available, use 3/16” molly  
 
bolts or 3/16” wall anchors, depending on wall material.
DOOR PULL AND BUMPER PLACEMENT
1. 
Clean mirror side of doors thoroughly to prepare surface  
 
 
for self adhesive door pulls.
2. 
Remove paper backing from door pulls and press them  
 
 
on to mirror side of door at location shown.  Fig. 2
3. 
Clean back side of mirror to prepare surface for self            
 
 
adhesive bumper.  Remove paper backing from door  
 
 
bumper and press bumper on to back side of left door.   
 
 Fig. 
3
ASSEMBLE DOORS TO CABINET
1. 
Insert the TOP of RIGHT MIRROR DOOR into the       
 
 
UPPER REAR TRACK, then move mirror door toward  
 
 
cabinet and lower into the BOTTOM of REAR TRACK.
2. 
The same procedure is repeated for LEFT HAND 
 
MIRROR DOOR except install the door in FRONT 
 TRACK.
For help, call us toll 
free!
1-800-325-8351
MIRROR CARE
• 
Use only clean warm water and a clean,    
 
soft, lint-free cloth.
• 
DO NOT USE cleaners that contain             
 
solutions of ammonia, vinegar or chlorine.
• 
DO NOT USE powdered cleaners or steel   
 wool.
• 
Never spray cleaning agent directly on        
 
mirror, especially on exposed edges and     
 
mirror backing.  Apply cleaner to soft cloth   
 
and wipe mirror.  Dry mirror thoroughly.
• 
Keep mirror dry.  A well ventilated bathroom is  
 important.
1
2
3
4
5
6
7
*Standard hardware - may be purchased locally.
Order replacement parts by “PART NO.” - Not by “KEY NO.”
SERVICE PARTS
One Year Limited Warranty
WARRANTY OWNER:  Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from 
defects in materials or workmanship for a period of one (1) year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, 
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE.
 
During this one year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be 
defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES, 
FILTERS, DUCT, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal 
maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or 
repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one year period as specifi ed for the express warranty. Some states do not allow 
limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S 
SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, 
CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION  WITH  PRODUCT USE OR PERFORMANCE. 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 
not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights, which vary from state to state. This 
warranty supersedes all prior warranties.
WARRANTY SERVICE: To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number 
below, (b) give the model number and part identifi cation and (c) describe the nature of any defect in the product or part. At the 
time of requesting warranty service, you must present evidence of the original purchase date. 
Date of Installation 
Builder or Installer
Model No. and Product Description
IF YOU NEED ASSISTANCE OR SERVICE - CONTACT:
Broan-NuTone Storage Solutions,    501 S. Wilhite Street,  Cleburne, TX  76031    www.nutone.com    (1-800-325-8351)
Door Pull Placement
Mirror Side
1-1/4”
1-1/4”
1-1/8”
Left Door
Right Door
1-1/8”
Back Side
Left Door
1
  
"
3
4
1
  
"
1
4
Door Bumper 
Placement
Fig. 3
Fig. 2
Approx.
64" to 
Floor
W
D
H
Fig. 1