Power Acoustik M-940 User Manual

WARNING

ALWAYS STAND AT A SAFE DISTANCE AWAY FROM THE SPINNER WHILE OPERATING

ALWAYS WEAR EYE PROTECTION WHEN OUTSIDE OF THE TRUCK CAB WHILE

SPREADER IS RUNNING.

B. Spread pattern depends on baffle settings and spinner RPM. Maximum spread width is 30 ft.

1. Speeding up or slowing down the engine will increase or decrease spread pattern width.

2. Internal baffle adjustments will move the spread pattern to the right or left.

3. External baffle adjustments will block spreading to the right or left side.

DESIRED SPREAD PATTERN

BAFFLE SETTING

INTERNAL

EXTERNAL

Centered Behind Truck

Both Down

All Three UP

All Material to the Right

RH - Up

LH - DownLH - Down

All Material to the Left

RH - DownRH - Down
LH - DownLH - Up

Behind Truck and Left

RH - Down

RH - Med.

LH - Up

Behind Truck and Right

RH - Up

LH - DownLH - Med.

Windrow Behind Truck

RH - Down

All - Down

LH - Down

4. External Baffles can be lowered to an intermediate position to baffle down the particles

that may otherwise leave the spinner at a high trajectory.

C. CALIBRATION

The average lbs. of salt per gearbox shaft revolution per inch of gate height is 6.7 Ibs.

GATE HEIGHT AVG. LBS/REV.

AVG. LBS/MIN.

AT FULL ENGINE RPM

AT 7 GPM HYD OIL FLOW

6.7

260

200

20.1

780

580

33.5

1300

970

46.9

1800

1350