John Deere SB1274 User Manual

OM 0391SB1274-A 

9 

1.  Park the tractor/snowblower on level 

ground, set the parking brake, disengage 
the PTO, shut off the engine, remove the 
key, and lower the implement to the ground 
BEFORE making any snowblower 
adjustments. 

2.  To avoid injury, do not adjust, unclog or 

service the snowblower with the tractor 
engine running. Making sure rotating 
components have completely stopped 
before leaving the operator’s seat 

3.  Keep the tractor/snowblower clean.  Snow 

and ice build-up can lead to malfunction or 
personal injury from thawing and refreezing 
in garage. 

4.  Always wear eye protection when cleaning 

or servicing the snowblower. 

5.  Do not work under any part of the tractor or 

snowblower, unless it is securely supported 
by safety stands. 

6.  Make sure all shields and guards are 

securely in place following all service, 
cleaning, or repair work. 

7.  Do not modify or alter this equipment or any 

of its components or operating functions. If 
you have questions concerning 
modifications, consult with your dealer. 

1.  If the tractor/snowblower is to be driven on 

public roads, it must be equipped with an 
SMV (Slow Moving Vehicle) sign.  Check 
local traffic codes that may apply to unit 
usage on public roads and highways in your 
area. 

2.  Be alert for all other traffic when driving the 

tractor/snowblower on public roads or 
highways. 

 

 

1.  Before storing the snowblower, certain pre-

cautions should be taken to protect it from 
deterioration. 

2.  Clean the snowblower thoroughly. 

3.  Make all the necessary repairs. 

4.  Replace all Safety Signs that are damaged, 

lost, or otherwise become illegible. If a part to 
be replaced has a sign on it, obtain a new 
safety sign from your dealer and install it in 
the same place as on the removed part. 

5.  Repaint all parts from which paint has worn or 

peeled. 

6.  Lubricate the snowblower as instructed under 

"Lubrication" section. 

7.  When the snowblower is dry, oil all moving 

parts.  Apply oil liberally to all surfaces to 
protect against rust. 

8.  Attach driveline shield safety chain around 

driveline by passing it over the upper hitch  

9.  Store in a dry place.