Husqvarna 10527SBE User Manual

5

Your new snow thrower has been as sem bled at the factory 
with the ex cep tion of those parts left unassembled for ship-
ping purposes. All parts such as nuts, washers, bolts, etc., 
necessary to com plete the as sem bly have been placed in 
the parts bag. To ensure safe and proper operation of your 
snow thrower, all parts and hard ware you assemble must 
be tightened se cure ly. Use the correct tools as nec es sary 
to ensure proper tightness.

1.   Remove all accessible loose parts and parts boxes 

from carton.

2.    Cut down all four corners of carton and lay panels fl at.

3.      Remove the two (2) screws securing the auger housing 

to the pallet.

4.      Remove all packing materials ex cept plastic tie holding 

speed control rod to lower handle.

5.   Remove the two (2) plastic ties securing the upper 

handle to the pallet.

6.    Remove snow thrower from carton and check carton 

thor ough ly for ad di tion al loose parts. 

A toolbox is provided on your snow thrower. The toolbox is 
located on top of the belt cover.  Store the extra shear bolts, 
nuts and multi-wrench provided in parts bag in the toolbox.

NOTE: The multi-wrench may be used for assembly of the 
chute rotator head to snow thrower and making ad just ments 
to the skid plates.

UNFOLD UPPER HANDLE
1.      Raise upper handle to the operating position and tight en 

handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1.    Remove plastic tie securing rod to lower handle.

2.    Insert rod into speed control bracket and secure with 

retainer spring.