Alvin TT499 Leaflet
TT499 Drawing Table “Caddy”
Assembly Instructions
ALVIN & CO., INC.
Bloomfield, CT • Grand Prairie, TX
www.alvinco.com
HARDWARE LIST
Key Qty. Description
A
1
Back Support Bracket (Thinner)
B
1
Front Support Bracket (Thicker)
C
1
Bolt for Tray Support (3/4")
D
3
Bolts for Tray Support (1/2")
E
4
Nuts
F
4
5/8" Mounting Screws
A
NOV 2004
A
B
C
D
E
F
B
D
E
C
F
E
F
No. TT499-1 White • No. TT499-2 Black
1.
The instrument tray is reversible. It can be
mounted to the left or right side of
your table.
mounted to the left or right side of
your table.
2.
Attach tray support brackets (
A & B) to
the instrument tray using bolts (
C & D)
and nuts (
E). Please note that the thicker
bracket (
B) attaches to the front of the
tray and the thinner bracket (
A) attaches
to the back. Please also note the proper
position for the longer bolt (
position for the longer bolt (
C).
3.
Position the assembled tray against the
left or right side of your table top and
mark the locations of the 4 mounting
screws on the underside of the table.
Pre-drill or pre-punch holes as desired.
left or right side of your table top and
mark the locations of the 4 mounting
screws on the underside of the table.
Pre-drill or pre-punch holes as desired.
4.
Attach brackets to the underside of the
table top with the 4 mounting screws (
table top with the 4 mounting screws (
F).
Front
Back