Woods Equipment SS96-2 User Manual
Safety 7
Snowblower_SRs (2/14/2012)
installed securely to ensure equipment is in a safe
condition before putting unit into service.
condition before putting unit into service.
Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
Replace if damaged. (See Safety Decals section for
location.)
Make sure shields and guards are properly
installed and in good condition. Replace if damaged.
installed and in good condition. Replace if damaged.
Do not disconnect hydraulic lines until engine is
stopped, power unit is properly secured, equip-
ment and all components are lowered to the
stopped, power unit is properly secured, equip-
ment and all components are lowered to the
ground, and system pressure is released by oper-
ating all valve control levers.
ating all valve control levers.
Use a suitable lifting device of sufficient capac-
ity. Use adequate personnel to handle heavy com-
ponents.
ity. Use adequate personnel to handle heavy com-
ponents.
STORAGE
Block equipment securely for storage.
Keep children and bystanders away from stor-
age area.
age area.