Echo 99944200532 User Manual

The discharge volume of the automatic oiler is preset to deliver 3 

to 4 cc/min. at normal operating RPM. During heavy or dry cutting 

conditions the oil discharge volume may be adjusted to assure ad-

equate lubrication. Refill the oil reservoir with each tank of fuel.

To prevent plastic deterioration, do not use synthetic or silicone 

based oil.

Tools required:  Screwdriver

1.  From bottom of gear case, turn adjustment screw (A) clockwise to 

decrease oil volume - counter clockwise to increase oil volume.

Very little visible oil on the saw chain will provide sufficient lubri-

cation.

Refer to your Pro Attachment Series power source or Split Boom 

Operator's Manual for correct engine fueling, starting and stopping 

instructions.

Guide bar cover is for travel/storage only. Remove cover before 

using unit.

1.  Wipe debris from around oil fill cap.

2.   Remove oil fill cap and fill reservoir with a quality, low viscosity 

guide bar and saw chain oil.

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop 

before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear 

gloves to protect hands from sharp edges and hot surfaces.