Tektronix AFG3000 User Manual
Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual
3-89
*SRE
This command sets and queries the bits in the Service Request Enable Register
(SRER).
(SRER).
Group
Status
Related Commands
*PSC
Syntax
*SRE <bit_value>
*SRE?
Arguments
<bit_value>::=<NR1>
where
<NR1> is a value in the range from 0 through 255. The binary bits of the SRER are
set according to this value. Using an out-of-range value causes an execution error.
The power-on default for SRER is 0 if *PSC is set to 1. If *PSC is set to 0, the SRER
maintains the previous power cycle value through the current power cycle.
where
<NR1> is a value in the range from 0 through 255. The binary bits of the SRER are
set according to this value. Using an out-of-range value causes an execution error.
The power-on default for SRER is 0 if *PSC is set to 1. If *PSC is set to 0, the SRER
maintains the previous power cycle value through the current power cycle.
Returns
<bit_value>
Examples
*SRE 48
sets the bits in the SRER to binary 00110000.
sets the bits in the SRER to binary 00110000.
*SRE?
might return 32, showing that the bits in the SRER have the binary value of
00100000.
might return 32, showing that the bits in the SRER have the binary value of
00100000.