Tektronix AFG3000 User Manual
Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual
3-107
*TST?
This command performs a self-test and returns the results.
Group
Calibration and Diagnostic
Related Commands
DIAGnostic[:ALL]?
Syntax
*TST?
Arguments
None
Returns
<NR1>
where
<NR1>=0 indicates that the self-test completed without errors.
where
<NR1>=0 indicates that the self-test completed without errors.
<NR1>
≠0 indicates that the arbitrary/function generator detected an error.
Examples
*TST?
performs a self-test and returns 0 if no error is reported.
performs a self-test and returns 0 if no error is reported.
*WAI (No Query Form)
This command prevents the instrument from executing further commands or
queries until all pending commands that generate an OPC message are complete.
queries until all pending commands that generate an OPC message are complete.
Group
Synchronization
Related Commands
*OPC
Syntax
*WAI
Arguments
None
Examples
*WAI
prevents the instrument from executing any further commands or queries until all
pending commands that generate an OPC message are complete.
prevents the instrument from executing any further commands or queries until all
pending commands that generate an OPC message are complete.
NOTE.
The self-test can take several minutes to complete. During this time, the
arbitrary/function generator does not execute any commands. Do not power off the
instrument during the self-test.
instrument during the self-test.