Symantec 10024709 User Manual

173

Command-line switches

The following parameters can be used with the -CRC32 switch:

Examples of -CRC32 usage

This table provides some examples of how you can use the -CRC32 switch.

Parameters for the -CRC32 switches

create

Create an ASCII CRC32 file from a disk 

verify

Verify a disk from a CRC32 file

pcreate

Create an ASCII CRC32 file from a partition

pverify

Verify a partition from an ASCII CRC32 file

dcreate

Create an ASCII CRC32 file from an image file

dverify

Verify an image file from an ASCII CRC32 file

crcfile

ASCII CRC32 file (default=Ghost.crc)

vlist

Verification list file (default=Ghost.ls)

vexcept

Verification exception file (no default)

-CRC32 usage examples

ghost.exe -fcr

Creates a CRC32 file (called 
Ghost.crc) while making an image 
file.

ghost.exe -fcr=d:\test.crc

Creates a CRC32 file (called Test.crc) 
while making an image file.

ghost.exe -crc32,
action=create,src=1,crcfile=ghost.crc

Creates a list of files and CRC32 
values for a disk.

ghost.exe -crc32,action=dverify,src=
x:dumpfile.gho,crcfile=ghost.crc

Verifies the list against an image file.

ghost.exe -crc32,action=pverify,src=
1:2,crcfile=filename.crc:2

Verifies a partition in an image file 
with multiple partitions. This 
example verifies that partition 2 on 
disk 1 is the same as partition 2 in the 
CRC file.