Symantec 10024709 User Manual
180
Transfer methods and hardware setup
Internal drives
Internal drives
Internal drives
To work with internal drives, ensure that each of the drives is properly
configured. This means that if fixed IDE drives are in use, then the jumpers on
the drives are set up correctly and the BIOS of the computer is configured for the
disk arrangement. Both the source and the destination drives must be free from
file corruption and physical hard drive defects.
configured. This means that if fixed IDE drives are in use, then the jumpers on
the drives are set up correctly and the BIOS of the computer is configured for the
disk arrangement. Both the source and the destination drives must be free from
file corruption and physical hard drive defects.
Third-party devices
Install the DOS driver as outlined in the device documentation.