Symantec 10024709 User Manual
55
Setting options and defaults
Setting Norton Ghost options and defaults
To install TCP/IP drivers
1
To set the default installation of TCP/IP drivers, in the Ghost Basic window,
click Options.
click Options.
2
In the Norton Ghost 2003 Options dialog box, click TCP/IP Driver Settings.
3
Do one of the following:
■
Select a network card from the drop-down list.
Norton Ghost displays any detected installed drivers. Select the network
driver for the particular make and model of the network card that is
installed on the computer.
See
Norton Ghost displays any detected installed drivers. Select the network
driver for the particular make and model of the network card that is
installed on the computer.
See
■
Click Browse to open the Ghost Boot Wizard and select a network card.
From the Ghost Boot Wizard you can add a network card. If your
network card is not on the list, you can modify a network card template.
See
From the Ghost Boot Wizard you can add a network card. If your
network card is not on the list, you can modify a network card template.
See
on page 84 and
4
Select one of the following:
■
Use DHCP: Use this option if your network contains a DHCP server.
■
Static IP Address: Complete the fields below this option if your network
does not contain a DHCP server.
does not contain a DHCP server.
5
Click OK.
Setting LPT peer-to-peer drivers
Norton Ghost automatically installs default LPT peer-to-peer drivers for your
hardware setup. However, you can set the LPT configuration manually if your
task fails or you need settings that are different from the automatic setup.
hardware setup. However, you can set the LPT configuration manually if your
task fails or you need settings that are different from the automatic setup.