Grizzly MODEL Leaflet

MODEL H7774

STAINLESS STEEL

TABLE

INSTRUCTION SHEET

Model H7774.

Legs attached to table top.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TR7728 PRINTED IN CHINA

Assembly

Use the 16 hex bolts w/washers to attach the legs
to the table top. Use the 4 cap screws w/washers
to attach the shelf to the legs. Insert feet into legs
and rotate the feet to level the table. Refer to the
parts breakdown if you need further help.

Cleaning

Use a mild detergent or a vinegar-water solution
to clean and sanitize your table. Always wipe the
table dry with a soft cloth after cleaning.

Care

•

Clean your table frequently to keep it sanitary
and looking nice.

•

Avoid cleaners that contain chlorine.

•

Avoid using steel wool when scrubbing—
small fragments can break off and rust in the
table surface.

•

Avoid direct contact with foods containing a
lot of citrus, salt, or acid. These may leave
a white stain that will require cleaning with a
ScotchBrite pad to renew the surface.

•

Always scrub in the same direction as the
stainless steel polish lines in the surface.

•

Avoid cutting directly on the table surface as
this will rapidly dull your knives and leave
small scratches in the table surface.

You MUST clean and sanitize food contact

surfaces before using this product. Failure

to follow this warning may lead to illness!

Shelf attached to legs.