Shure SM86 Leaflet
SM86 Cardioid Condenser Microphone
SM86
Type
Condenser
Frequency Response
50 to 18,000 Hz
Polar Pattern
Cardioid
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
(1 Pa = 94 dB SPL)
Impedance
150 Ohms at 1 kHz
Recommended minimum load impedance: 600 Ohms
Output Clipping Level
1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1,000 Hz)
1000 ohm load (1% THD): 147 dB
Self-Noise
23 dB typical, A-weighted
Dynamic Range (1000 ohms)
124 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio
71 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
Power Requirements
11 to 52 Vdc, 5.2 mA
Case
Dark gray, enamel-painted, die-cast with a stainless steel grille
Connector
Three-pin professional audio connector (male XLR type)
Net Weight
284 grams (10 oz)
Dimensions
183 mm (6-3/16 in.) L x 49 mm (1-1/4 in.) W at the widest point
Product Specifications
www.shure.com
©2009 Shure Incorporated
Overview
Features
Specifications
The SM86 is an award-winning, rugged cardioid condenser microphone with an extended high frequency response. Constructed with a three-point
shock mount and a two-stage internal pop filter, the tailored frequency response of the SM86 delivers consistently smooth reproduction of lead vocals,
even under the most extreme performance conditions.
shock mount and a two-stage internal pop filter, the tailored frequency response of the SM86 delivers consistently smooth reproduction of lead vocals,
even under the most extreme performance conditions.
Condenser cartridge for studio quality sound
•
Tailored frequency response for a clear reproduction of vocals
•
Rugged construction withstands the rigors of touring sound
•
Cardioid polar pattern minimizes unwanted background noise
•
Excellent choice for stage monitors and personal monitors
•
Built-in three-point shock mount minimizes handling noise
•
Two-stage “pop” filter reduces wind and breath noise
•
Polar Pattern
Frequency Response
Available Models
Optional Accessories and Replacement Parts
SM86-LC
Includes Stand Adapter and Zippered Pouch
A25D
Microphone Clip
A55M
Shock Stopper Cip
A55HM
Shock Stopper Half Clip
A85WS
Microphone Windscreen
RPM226
Replacement Grille
2500 Hz
6400 Hz
10000 Hz
250 Hz
500 Hz
1000 Hz
20
20000
1000
10000
50 100
9
8
7
6
5
4
3
29
8
7
6
5
4
3
2
+10
0
–10
Hz
Bd
9