Sennheiser 100 G3 User Manual
Cleaning the devices
27
Cleaning the devices
EM 100
Before cleaning, disconnect the device from the mains.
Use a slightly damp cloth to clean the receiver from time to time. Do not use any solvents
or cleansing agents.
or cleansing agents.
SK 100
Use a slightly damp cloth to clean the bodypack transmitter from time to time. Do not
use any solvents or cleansing agents.
use any solvents or cleansing agents.
SKM 100
Use a slightly damp cloth to clean the radio microphone from time to time. Do not use any
solvents or cleansing agents.
solvents or cleansing agents.
Display
Function of the menu item
Main menu
Sensitivity
Adjusts the sensitivity “
AF
”
Frequency Preset*
Changes the frequency bank and the channel
Name*
Enters a freely selectable name
Auto Lock
Activates/deactivates the automatic lock mode
Advanced
Calls up the extended menu “
Advanced Menu
”
Exit
Exits the operating menu and returns to the current standard display
Extended menu “Advanced Menu”
Tune
Sets the transmission frequencies for the frequency bank “
U
”
Special function: Sets a channel and a transmission frequency for the frequency bank “
U
”
Select this menu item and call it up by pressing the
SET
button (SK)/the multi-function
switch (SKM) until the channel selection appears.
Mute Mode (SK only)
Sets the mode for the
MUTE
switch
Cable Emulation (SK only)
Emulates guitar cable lengths/guitar cable capacities
Pilot Tone*
Activates/deactivates the pilot tone transmission
LCD Contrast
Adjusts the contrast of the display panel
Reset
Resets the bodypack transmitter/radio microphone
Software Revision
Displays the current software revision
Exit
Exits the extended menu “
Advanced Menu
” and returns to the main menu
*
For information on the sychronization of transmitters with receivers, refer to 20.
CAUTION!
Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit and damage the
electronics.
electronics.
Keep all liquids away from the devices.