Sennheiser 100 G3 User Manual
Specifications
31
Specifications
EM 100
RF characteristics
Modulation
wideband FM
Receiving frequency ranges
516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A to E, G, see page 4)
780–822, 823–865 MHz (A to E, G, see page 4)
Receiving frequencies
1,680 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 12 factory-preset
channels, intermodulation-free
channels, intermodulation-free
1 frequency bank with up to 12 user programmable
channels
channels
Switching bandwidth
42 MHz
Nominal/peak deviation
±
24 kHz /
±
48 kHz
Receiver principle
true diversity
Sensitivity (with
HDX
, peak deviation)
<
2,5 μV for 52 dBA
rms S/N
Adjacent channel rejection
typ.
≥
65 dB
Intermodulation attenuation
typ.
≥
65 dB
Blocking
≥
70 dB
Squelch
Off, Low: 5 dB
μ
V, Middle: 15 dB
μ
V, High: 25 dB
μ
V
Pilot tone squelch
can be switched off
Antenna inputs
2 BNC sockets
AF characteristics
Compander system
Sennheiser
HDX
EQ presets (switchable,
affect the line and monitor outputs):
affect the line and monitor outputs):
Preset 1: “
Flat
”
Preset 2: “
Low Cut
”
–3 dB at 180 Hz
Preset 3: “
Low Cut/High Boost
”
–3 dB at 180 Hz
+6 dB at 10 kHz
+6 dB at 10 kHz
Preset 3: “
High Boost
”
+6 dB at 10 kHz
S/N ratio (1 mV, peak deviation)
≥
110 dBA
THD
≤
0.9%
AF output voltage
(at peak deviation, 1 kHz AF)
(at peak deviation, 1 kHz AF)
¼’’ (6.3 mm) jack socket (unbalanced): +12 dBu
XLR socket (balanced): +18 dBu
Adjustment range of audio output level
48 dB (in steps of 3 dB)
+6 dB gain reserve
+6 dB gain reserve
Overall device
Temperature range
–10°C to
+
55°C
Power supply
12 V
Current consumption
300 mA
Dimensions
approx. 190 x 212 x 43 mm
Weight
approx. 980 g