Sony UWP-X1/X2 User Manual
Attachment and Installation Procedures
24
Removing the belt clip
Insert a pointed object such as a
ballpoint pen between the belt clip and
the transmitter to make some space
between them, and then remove the
end of the belt clip from the hole on
the side of the transmitter.
ballpoint pen between the belt clip and
the transmitter to make some space
between them, and then remove the
end of the belt clip from the hole on
the side of the transmitter.
Attaching the supplied
accessory to the hand-
held microphone
(UTX-H1)
accessory to the hand-
held microphone
(UTX-H1)
Attaching the microphone
holder
holder
Attaching the supplied
accessories to the
portable diversity tuner
(URX-P1)
accessories to the
portable diversity tuner
(URX-P1)
Connecting the supplied
conversion cable to the
OUTPUT connector
conversion cable to the
OUTPUT connector
Note
The supplied conversion cables are for
use with the URX-P1 only. Attaching
the cable to the audio input connector
of the UTX-B1 may cause damage to
the transmitter or the device connected
to the transmitter.
use with the URX-P1 only. Attaching
the cable to the audio input connector
of the UTX-B1 may cause damage to
the transmitter or the device connected
to the transmitter.
Attaching the belt clip
See “Attaching the belt clip” on page
23.
23.
Example: XLR-BMP conversion
cable (supplied)
cable (supplied)
For a secure connection, be sure to
turn and lock the connector cover.
turn and lock the connector cover.
Insert the bottom part of the
microphone into the holder.
microphone into the holder.