Sony V6 User Manual
38
Attachment and Installation Procedures
Attaching the supplied
accessory to the hand-held
microphone (UTX-H2)
accessory to the hand-held
microphone (UTX-H2)
To attach the microphone
holder
holder
Inserting the plug-on
transmitter (UTX-P1) into
the supplied soft case
transmitter (UTX-P1) into
the supplied soft case
Attaching the optional
accessory to the plug-on
transmitter (UTX-P1)
accessory to the plug-on
transmitter (UTX-P1)
To attach a microphone or a
cable
cable
To detach a microphone or a cable
Insert the bottom
part of the
microphone into
the holder.
part of the
microphone into
the holder.
Insert the UTX-P1 into the supplied soft
case with the rear side up, and close the
flap.
case with the rear side up, and close the
flap.
Push the microphone or cable
connector (XLR-3-12C connector)
against the audio input connector of
the UTX-P1 until it clicks into place.
connector (XLR-3-12C connector)
against the audio input connector of
the UTX-P1 until it clicks into place.
Press the release button and pull off
the microphone or cable slowly.
the microphone or cable slowly.
Release button
Microphone or
cable connector
cable connector