Vocopro DA2277 User Manual

Rear Panel Descriptions and Controls

1. ANTENNA 1 jack –

Connect a RECEIVER ANTENNA to this jack before attempting to use this device.

Ensure the ANTENNA is fully extended for optimal signal reception.

2. MIC OUT jack (1/4") –

This jack provides an AUDIO OUT connection of MICROPHONE OUTPUT only for

vocal specific applications (vocal effects). No A/V source music will output from this jack. Connect a 1⁄4"
audio patch cable from this jack to the AUDIO IN jacks on your external device.

3. AUDIO OUT jacks (XLR) –

These jacks are for connecting balanced AUDIO OUTPUT from the DA-2277

to external amplifiers, mixers or recording devices. Connect a pair of XLR cables from these jacks to the
AUDIO IN jacks on your external amplifier, mixer or recording device.

4. AUDIO OUT 1 AND 2 jacks (RCA) –

These jacks are for connecting unbalanced AUDIO OUTPUT from the

DA-2277 to external amplifiers, mixers or recording devices. Connect a paired RCA patch cable from these
jacks to the AUDIO IN jacks on your external amplifier, mixer or recording device. Up to 2 devices can be
connected to these AUDIO OUT jacks.

5. A/V AUDIO IN jacks (RCA) –

These jacks are for connecting AUDIO from your A/V source players.

Connect a paired RCA patch cable from these jacks to the AUDIO OUT jacks on your A/V source player.
Up to 4 A/V source players can be connected.

6. VIDEO IN jacks (RCA) –

These jacks are for connecting VIDEO from your A/V source players. Connect an

RCA patch cable from these jacks to the VIDEO OUT jacks on your A/V source players. Ensure that the
VIDEO IN jacks correspond with the player connected to the AUDIO IN jacks.

7. VIDEO OUT jacks (RCA) –

These jacks route the VIDEO signals from the DA-2277 to your TV or display

devices. Connect an RCA patch cable from these jacks to the VIDEO IN jack on your TV or display device.
Up to 2 display devices can be connected to these jacks.

8. ANTENNA 2 jack –

Connect a RECEIVER ANTENNA to this jack before attempting to use this device.

Ensure the ANTENNA is fully extended for optimal signal reception.

9. VOLTAGE selector –

Selects between 115V and 230V power supply settings. Select 110V for North

American based power requirements and 230V for European based power requirements.

NOTE:

It is imperative that this setting is set correctly before powering on your DA-2277.

www.vocopro.com

LA VERNE, CALIFORNIA USA

VIDEO

OUT

VIDEO

V3/LD

V4/VCV

V2/CDG

V1/DVD

A1/DVD

A2/CDG

A3/LD

A4/VCD

VIDEO IN

AUDIO OUT

3/L BALANCED OUT 3/R

MIC OUT ONLY

AC OUTPUT

CAUTION

RISK OF ELECTRICAL SHOCK
DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK,
DO NOT REMOVE COVER SCREWS
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
PERSONNEL

WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRICAL SHOCK
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE

SERIAL NUMBER

ANT 2

ANT 1