Tascam DP-02 User Manual
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF
2 – Advanced techniques
When you have rehearsed your punch-in, you can start
recording.
recording.
1. Press the
RHSL
key so that the indicator goes out
(but the
AUTO PUNCH
indicator is still lit).
2. Press
PLAY
(
¥
) so that playback starts. Use the
pre-roll time to get ready to record.
At the punch-in point, the unit goes into record mode (the
RECORD
(
–
) indicator lights).
At the punch-out point, recording stops (the
RECORD
(
–
)
indicator goes out), and playback continues until the post-
roll point and then returns to the pre-roll point. The
roll point and then returns to the pre-roll point. The
AUTO
PUNCH
indicator is turned off (the track arming status
stays the same).
If you want to re-record the punch, turn
AUTO PUNCH
back on before recording again.
Punch recording
The pre-roll and post-roll times can be set to suit your style
of playing.
of playing.
1. Press
MENU
and scroll down to
PREFERENCE
and
press the
¥
cursor or
YES/ENTER
key.
NOTE
The N.SUPPRESSOR setting os only available on the
DP-02. The DP-02CF will not show this option.
DP-02. The DP-02CF will not show this option.
2. Use the cursor keys to move the cursor to the Pre
(pre-roll time) item, and use the
DATA dial
to set the
value in seconds.
T I P
The pre-roll and post-roll times can be set between 1.0
seconds and 9.9 seconds in 0.1 second steps.
seconds and 9.9 seconds in 0.1 second steps.
3. Use the cursor keys to move down to the Post (post-
roll time) item and use the
DATA dial
to change the
value.
4. Press
NO/EXIT
when you’re done, so that you can
start using these settings.
Pre-roll and post-roll time