Yamaha 01V96 User Manual

Chapter 3—Selected Channel Window

C 

This section contains the delay controls for the Stereo Out. The rotary control is used to set 
the delay time, and the ON button turns the Delay function on and off.

D 

This section contains the balance control and ON buttons, and channel fader for the Stereo 
Out.

E 

This section contains the Compressor controls and display graph for the currently selected 
Stereo Out. Its layout is identical to the COMPRESSOR section for Input Channels except 
there is no LINK button. See “COMPRESSOR section” on page 16 for more information.

F 

This section contains the Insert parameters for the Stereo Out. The INSERT button turns 
the Insert on and off. The OUT and IN parameters are used to specify the insert out desti-
nation and insert in source respectively. The POSITION parameter is used to specify the 
position of the Insert in the signal path.

G 

This section contains the Fader and Mute group functions for the Stereo Out. Use the 
FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE 
GROUP buttons to add it to Mute groups.

This is the Selected Channel window for the 
Remote Channels.

A 

Channels can be selected by clicking the 
Channel ID and choosing from the list that 
appears, or by clicking the left and right 
Channel Select buttons. The long channel 
name is displayed below the Channel ID.

B 

This section contains the ON button and the 
channel fader for the currently selected 
Remote Channel.

1

2