Yamaha aw1600 User Manual
Mixing the demo song
31
AW1600 Owner’s Manual
3
Listening to the demo song
1
Press the RTZ [
] key.
The demo song will be rewound to the beginning.
2
Press the PLAY [
] button.
The demo song will begin playing.
3
While listening to the demo song, try oper-
ating faders 1–8 and 9/10–15/16.
ating faders 1–8 and 9/10–15/16.
Notice that the level of the corresponding track will
change. Operating the [STEREO] fader will change
the overall level of the song.
change. Operating the [STEREO] fader will change
the overall level of the song.
4
To mute the playback of
a specific track, access
the MONITOR screen
ON/OFF page, either by
repeatedly pressing the
[MONITOR] key or by
holding down the [MONITOR] key and using
the CURSOR [
a specific track, access
the MONITOR screen
ON/OFF page, either by
repeatedly pressing the
[MONITOR] key or by
holding down the [MONITOR] key and using
the CURSOR [
]/[
] keys.
The MONITOR screen ON/OFF page lets you switch
each channel on/off. A channel that is switched off in
this page will not be sent to the stereo bus or AUX bus,
and will be muted.
each channel on/off. A channel that is switched off in
this page will not be sent to the stereo bus or AUX bus,
and will be muted.
5
Press the [TRACK SEL] key(s) for the track
channel(s) that you want to mute. (You may
select more than one channel.)
channel(s) that you want to mute. (You may
select more than one channel.)
For example if you press [TRACK SEL] keys 1 and 3,
the screen will change as follows, and track channels 1
and 3 will be muted. At this time, [TRACK SEL] keys
1 and 3 will go dark. The graphic in the display will
also indicate this.
the screen will change as follows, and track channels 1
and 3 will be muted. At this time, [TRACK SEL] keys
1 and 3 will go dark. The graphic in the display will
also indicate this.
6
To cancel the muted state, press the same
[TRACK SEL] key you pressed in step 5, to
make the indicator light green.
[TRACK SEL] key you pressed in step 5, to
make the indicator light green.
7
If you want to monitor the playback of just a
specific track, access the MONITOR screen
SOLO page by either repeatedly pressing
the [MONITOR] key or by holding down the
[MONITOR] key and using the CURSOR
[
specific track, access the MONITOR screen
SOLO page by either repeatedly pressing
the [MONITOR] key or by holding down the
[MONITOR] key and using the CURSOR
[
]/[
] keys.
The SOLO page of the MONITOR screen lets you
mute all other channels while listening to only a spe-
cific channel. (This is called the “solo” function.)
When you sol a channel in this page, the signals of the
remaining channels will be muted, and will no longer
be sent to the stereo bus or AUX buses.
mute all other channels while listening to only a spe-
cific channel. (This is called the “solo” function.)
When you sol a channel in this page, the signals of the
remaining channels will be muted, and will no longer
be sent to the stereo bus or AUX buses.
• This mute function switches muting on or off for the mixer
track channels. Recorder track playback can be muted via the
TRACK screen VIEW page (
TRACK screen VIEW page (
NOTE
• The [TRACK SEL] key you press last will always light orange
regardless of the mute status. This indicates that this channel
is the “selected channel” (
is the “selected channel” (
NOTE
• In this page, pressing the [STEREO SEL] key will have no
effect.
NOTE