Yamaha 01V User Manual

 

• Do not locate the 01V in a place subject to excessive heat or in direct sunlight. This 

could be a fire hazard.

• Do not place the 01V in a place subject to excessive humidity or dust. This could be 

a fire and electrical shock hazard.

• Connect the 01V power cord only to an AC outlet of the type stated in this 

 

 or as marked on the 01V. Failure to do so is a fire and electrical shock hazard.

• Do not plug several devices into the same AC outlet. This can overload the AC outlet, 

and can be a fire and electrical shock hazard. It may also affect the performance of 
some devices.

• Do not place heavy objects on the power cord. A damaged power cord is a potential 

fire and electrical shock hazard.

• If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for 

a replacement. Using the 01V in this condition is a fire and shock hazard.

• Hold the power cord plug when disconnecting from an AC outlet. Never pull the 

cord. Damaging the power cord in this way is a potential fire and electrical shock 
hazard. 

• Do not place small metal objects on top of the 01V. Metal objects inside the 01V are 

a fire and electrical shock hazard. 

• Do not block the 01V ventilation slots. The 01V has ventilation slots on the top and 

rear to prevent the internal temperature from rising. Blocked ventilation slots are a 
fire hazard. 

• Do not try to modify the 01V. This could be a fire and electrical shock hazard.

• The 01V operating temperature is between 5˚C and 35˚C (41˚F and 95˚F).

 

• Turn off all audio devices and speakers when connecting to the 01V. Refer to the 

owner’s manual for each device. Use the correct cables and connect as specified.

• If you notice any abnormality—such as smoke, odor, or noise—turn off the 01V 

immediately. Remove the power cord from the AC outlet. Confirm that the abnor-
mality is no longer present. Consult your dealer for repair. Using the 01V in this con-
dition is a fire and shock hazard.

• If a foreign object or water gets inside the 01V, turn it off immediately. Remove the 

power cord from the AC outlet. Consult your dealer for repair. Using the 01V in this 
condition is a fire and electrical shock hazard.

• If you plan not to use the 01V for a long period of time, remove the power cord from 

the AC outlet. Leaving the 01V connected is a fire hazard.

• Do not use benzene, thinner, cleaning detergent, or a chemical cloth to clean the 01V. 

Use only a soft, dry cloth.

• The 01V is a heavy piece of equipment. Always grip the underneath, not the side pan-

els, when lifting.