Yamaha 02R User Manual

MIXING Display Functions

The ROUTING display function is used to select the bus routing of the 
input channels and tape and effect return signals. The first sixteen input 
channels, 1 through 16, can also be routed to the direct outputs.

By default, all channels are routed to the stereo bus.

All the input channels and tape and effect return signals can be routed to 
the output buses and the stereo bus. You can only route the first sixteen 
input channels, MIC/LINE 1 through 16, to the direct outputs.

The outputs for the optional boards are as follows:

If you select both direct out and an output bus for a channel, the direct 
output will take priority.

Shown below is the first page of the ROUTING display function – 
MIC/LINE 1 through 16 and LINE 17/18 through 23/24:

Select this screen by pressing a [SEL] button for one of the MIC/LINE 
channels.

Bus 1 to 8

Direct 1 to 8

Bus 1 to 8

Direct 9 to 16

Bus 1 to 8

Bus 1 to 8

Bus 1 to 8

Bus 1 to 8