Yamaha 02R User Manual

Automation

[SEL] button (edit key) has been pressed. If the parameter has been 
selected and the channel [SEL] button has been pressed, automation 
playback for that parameter will be stopped, and you can record new 
data.

This mode is effective only for the faders. It controls how to connect the 
current fader AUTOMIX with the previous fader data after editing the 
faders, disabling the parameter, or stopping the recording.

If RETURN is off (default setting – the box has not been checked), the 
fader will stay at the position it reached at the Edit Out time. When the 
first fader AUTOMIX event is found, the fader will follow the event.

If RETURN is on ( box has been checked). the fader will return to the 
previous AUTOMIX position at the Edit Out time.

This mode is effective only for the faders. When it is set to ABSOLUTE, 
recording fader movement data overwrites the previously recorded data. 
When it is set to RELATIVE, the previous fader movement data is added 
to the fader movements during recording.

This operation allows you to undo the following conditions: updating the 
automix (after recording has been stopped via the stop key or due to the 
interrupted timecode), recalling the data from the automix memory into 
the current mix, creating a new mix, or aborting the automix. It returns 
the current automix to its previous state.

The following five operations have been made as control icons: 
AUTOREC, REC, PLAY, STOP, ABORT. Use the CURSOR buttons to 
select the desired operation and press the [ENTER] button.

 – Selecting this icon will start AUTOMIX recording when the 

02R receives timecode, even if it is not in REC ready mode. You can use 
this key when you do not want to press the REC ready key many times.