Yamaha 02R User Manual
82
Mixing and Automation
Digital Recording Console 02R Getting Started Guide
•
CH.Lib. – channel library recall. The number indicates the
channel library number (from 1 to 64).
channel library number (from 1 to 64).
•
Channel – the channel that the recall applies to. For scene memory
recall, this field is blank.
recall, this field is blank.
3.
Rotate the encoder wheel to change the value at the current
cursor location.
cursor location.
For timecode, you can independently adjust the hours, minutes, seconds,
and frames values.
and frames values.
4.
Use the CURSOR buttons to select the INSERT icon and press the
[ENTER] button to insert an event.
[ENTER] button to insert an event.
A new event that is an exact duplicate of the current event will be inserted
in the table. Use the CURSOR buttons to select the new event and adjust its
values to suit. If you change its timecode value, the new event will be
moved to its proper location in the time sequence.
in the table. Use the CURSOR buttons to select the new event and adjust its
values to suit. If you change its timecode value, the new event will be
moved to its proper location in the time sequence.
5.
Use the CURSOR buttons to select the DELETE icon and press
[ENTER] to delete the current event.
[ENTER] to delete the current event.
Editing Channel ON/OFF
You can edit the timing and contents of the channel on/off events that have
been recorded into the current automix.
been recorded into the current automix.
1.
Press the [AUTOMIX] button again.
You can stop when the “Event Edit (CH ON)” screen appears:
Note:
If the cursor is anywhere on the screen other than over the INSERT or
DELETE icons, pressing the [ENTER] button will cause the cursor to move over
the DELETE icon.
the DELETE icon.
AUTOMIX