Korg Trinity User Manual

 

2

 

Insert Effects utilize effect sizes of 1, 2, and 4.

 

 (Single or Double mode Program):

Up to three effects with a total effect size of four or less can be inserted in series.

 

 (Drum mode Program):

Up to four effects with a total effect size of four or less can be inserted in series/parallel.
Use P5 (DrumKit) in Global mode to assign the DrumKit sounds to Insts 1–4 for each key.

 

Up to eight effects with a total effect size of eight or less can be inserted.

 

Up to eight effects with a total effect size of eight or less can be inserted.

 

The following table shows the input/output of the 

 

 sound (the sound without any effect applied) and 

the 

 

 sound (the sound with an effect applied) for each size.

The Size 1 effects are all monaural in/monaural out for both dry and wet sounds. Therefore, Size 1 effects 
have monaural input as shown in the figure on the next page. If the Effect On/Off parameter is turned 
Off, the effect is bypassed. When a size 1 effect is selected, the bypass sound becomes monaural.

Regardless of the Effect On/Off setting, you can turn all Insert Effects Off by sending the Effect 2 
Control message (Controller #92). When the Controller value is 0, all effects turn Off. They turn On 
with a value of 1–127.

+

+

Shown on the upper left corner of the effect block diagrams.