Korg AX10B User Manual

Use the PRE FX button to select a pre-effect, and use the VALUE buttons to adjust the amount of effect. If you have selected
WAH as the PEDAL FX, you can use the expression pedal to control WAH.

Compressor with an emphasized attack

Adjusts sensitivity: 0~30

---

---

Distortion optimized for bass

Amount of distortion: 0~30

---

---

This generates a pitch one octave lower than the

Adjusts tone: 0~30

Controls the

Specifies the effect

original sound, and mixes it with the original sound

effect depth

depth at maximum

to add depth and low end. (*1)

pedal position

 This effect may not operate correctly if two or more strings are played simultaneously, or when low-pitched strings are played.

Use the AMP TYPE selector to select an amp, and adjust the MID FC/GAIN, BASS, MIDDLE, TREBLE and VOLUME. A
cabinet effect appropriate for that amp is added to each AMP TYPE (with the exception of EQ). Changing the setting of the
AMP/LINE switch will change the depth of the cabinet effect.

3-band EQ from direct line input.

A tube amp with the ULTRA LO switch turned ON.
(recommended CAB: 810CLS)

A tube amp suitable for rock. (recommended CAB: 810CLS)

A tube amp whose basic character changes according to the
setting of the value dial. (recommended CAB: 118+112)

An amp that is typical of 80’s sounds. (recommended CAB: 410MTL)

An amp that is typical of the LA sound. (recommended CAB: 410 LA)

An amp distinctive for its eye-catching gold panel and clean
sound. (recommended CAB: 410MDN)

A combo amp favored by jazz bassists. (recommended CAB: 115JAZ)

A tube combo ideal for the Motown sound. (recommended CAB: 115STU)

A 100W tube amp made by Vox. (recommended CAB: 215TALL)

A 200W tube amp made in the UK. (recommended CAB: 415 UK, 412 UK).

Mid-range peak frequency
adjustment (when AMP TYPE is set
to EQ ~ JAZZ) 1~5

Gain adjustment (when AMP TYPE
is set to STUDIO ~ UKMAJOR)

Adjusts low-frequency range.

Adjusts mid-frequency range.

Adjusts high-frequency range..

Adjusts volume.

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

Adjusts noise reduction depth.
(Hold down the TAP button and turn
EFF.DEPTH)

 Functions as MID FC if AMP TYPE is set to EQ~

JAZZ. Functions as GAIN if AMP TYPE is set to
STUDIO ~ UKMAJOR.
(*3)

 To adjust the noise reduction, hold down the

FUNCTION button and turn the VOLUME (NR) knob.

Use the MODULATION selector to choose a modulation effect, and use the DEPTH buttons to adjust the DEPTH parameter.
To adjust the SPEED parameter, hold down the FUNCTION button and use the DEPTH (SPEED) buttons. If MOD is selected
as the PEDAL FX, you can use the expression pedal to control the effect.

Vintage stereo chorus.

Vintage flanger.

Vintage phaser.

Vintage tremolo.

Rotary speaker simulation.

Mode 1 artificially generates
feedback, and operates when
a note is held  for an extended
time.
Mode 2 generates feedback
one octave higher.

Pitch shifter mixed with the
direct sound.

Filter whose cutoff frequency
varies in response to picking
strength (for “Normal”) or pedal
movement (for “PEDAL FX”)

Vintage U-Vibe.

“Talking” effect controlled by
pick attack (for “Normal”) or
pedal movement (for “PEDAL
FX”)

Pitch shifter with 100% effect
(wet).

Effect depth: 0~30

Feedback amount:
0~15
Vibrato depth:
16~30

Pitch shift amount
(*5)

: 12.~1., d., d,

1~12

Down sweep 

 :

0~15,
UP sweep 

 :

16~30

Effect depth: 0~30

Pitch shift amount
(*7)

: 12.~1., 1~12

Modulation

speed: 0~30

Mode setting:
1. Normal,
2. Overtone

Effect level: 0~30

Resonance: 0~30

Modulation
speed: 0~30

Mode setting: 1~5
(*6)

N/A (*4)

Modulation speed

First half of pedal
movement controls
feedback amount;
further movement
controls vibrato
depth

Effect level

Cutoff frequency

Modulation speed

Controls “talking”
effect

Controls the pitch
shift amount

Effect depth: 0~30

Mode setting:
1. Normal,
2. Overtone

Pitch shift amount
(*5)

: 12.~1., d., d,

1~12

Resonance: 0~30

Effect depth: 0~30

Effect depth: 0~30

Pitch shift amount when
pedal at maxi-mum
(*7)

: 12.~1., 1~12,

SP

N/A (*4)

Mode
setting:
1~5 (*6)

N/A (*4)

 You cannot use the buttons to edit the value. (*5) “.” indicates negative (-), “d” indicates detune.

 Mode setting: 1: YAH-YAH, 2: U-WAH, 3: YOI-YOI, 4: YEAH, 5: HI U-WAH

 “.” indicates negative (-), “SP” indicates stair-step pitch change one octave upward.