Korg EMX-1 User Manual
56
Copying a part
COPY PART .............................................................................
Here’s how you can copy the selected part (with its sound settings
and sequence data, including motion sequence) to another part.
and sequence data, including motion sequence) to another part.
1.
If the EMX-1 is playing, press the STOP/CANCEL key to stop play-
back.
back.
2.
Press a part key to select a destination (copy-destination) for the
part being copied (the key will light).
part being copied (the key will light).
3.
Hold down the SHIFT key and press step key 4 (Copy Part). (Key 4
will blink.) The copy-destination part key will begin blinking.
will blink.) The copy-destination part key will begin blinking.
4.
Use the dial to select the pattern number of the part to be copied
(copy-source).
(copy-source).
5.
Press a part key to select the copy-source part. (The copy-source key
will blink, and the copy-destination key will go dark.) You can hear
the sound of the copy-source by pressing its part key. (Synth parts
will sound at C4.)
will blink, and the copy-destination key will go dark.) You can hear
the sound of the copy-source by pressing its part key. (Synth parts
will sound at C4.)
6.
Press step key 4 once again to execute the Copy Part operation. If
you decide to cancel, press the STOP/CANCEL key.
you decide to cancel, press the STOP/CANCEL key.
When you copy between parts, only the trigger data is copied.
If the copy operation would result in there being more than 24 mo-
tion sequences, the motion sequences will not be copied.
Copying only the sound of a part
COPY SOUND ........................................................................
Here’s how you can copy only the sound settings of another part to
the selected part. Step data and motion sequence data will not be
copied.
the selected part. Step data and motion sequence data will not be
copied.
1.
If the EMX-1 is playing, press the STOP/CANCEL key to stop play-
back.
back.
2.
Press a part key to select a destination (copy-destination) for the
part being copied (the key will light).
part being copied (the key will light).
3.
Hold down the SHIFT key and press step key 5 (COPY SOUND).
(Key 5 will blink.) The copy-destination part key will begin blink-
ing.
(Key 5 will blink.) The copy-destination part key will begin blink-
ing.
4.
Use the dial to select the pattern number of the part to be copied
(copy-source). You can press the SHIFT key to view the pattern name
of the copy-destination.
(copy-source). You can press the SHIFT key to view the pattern name
of the copy-destination.
5.
Press a part key to select the copy-source part. (The copy-source key
will blink, and the copy-destination key will go dark.) You can hear
the sound of the copy-source by pressing its part key. (Synth parts
will sound at C4.)
will blink, and the copy-destination key will go dark.) You can hear
the sound of the copy-source by pressing its part key. (Synth parts
will sound at C4.)
6.
Press step key 5 once again to execute the Copy Sound operation. If
you decide to cancel, press the STOP/CANCEL key.
you decide to cancel, press the STOP/CANCEL key.
You cannot copy sound data between a synth part and a drum part.
Erasing the sequence data of a part
To erase sequence data from the selected part, you can use the sixteen step keys
to turn each trigger on/off independently, or use one of the following two operations.
to turn each trigger on/off independently, or use one of the following two operations.
To erase all of a part's performance data
CLEAR PART ............................................................................
This operation erases the rhythm or phrase pattern (trigger, note
number, gate time) and motion sequence data at once.
number, gate time) and motion sequence data at once.
3
3
3
3