Korg music workstation/sampler User Manual

4 Mute tracks.

Press the [EXIT] key to select P0: Play/REC, and access 
the Program T01–08/T09–16 page.
Mute all tracks other than tracks 3 and 4. When you 
play back, you will hear only the electric piano and 
guitar performances.

5 As described in steps 1–4, set song S001: VERSE to 

008 (8 measures), making it an eight measure song.
Then mute all tracks other than tracks 1–3. When you 
play back, you will hear only the drums, bass, and elec-
tric piano.

6 As described in steps 1–4, set song S002: CHORUS 

Here’s how to change the key of a song.

1 Select song S002: CHORUS.

2 Select the Sequencer P5: Track Edit page.

3 Use “Track Select” to select T02 as the track whose 

4 Specify the measures for which the key will be 

changed.
Select “From Measure,” and use the VALUE controllers 
to set this to 001. Next select “To End of Measure,” and 
specify 008.

5 Select the page menu command “Shift/Erase Note.”

A dialog box will appear. If you did not specify the 
range of measures in step 4, set “From Measure”–“To 
Measure” to specify the range that will be edited.

(

☞PG p.84)

Press the OK button. The pitch of track 2 will be raised 
three semitones.

6 Use the same procedure to raise the pitch three semi-

If you change the key of a track that is using a drum 
kit, the relationship between the notes and the instru-
ments of the drum kit will be shifted, and the 
sequence will not play the correct rhythm instru-
ments.