Korg PXR4 User Manual

29

Use the dial to specify the number of measures that 
will be recorded. (You can specify up to 999 mea-
sures.) If this is “Off,” recording will continue until 
you press the [STOP] key during recording. Press the 
[EXIT] key several times to return to Locate mode.

3

Recording will start at the beginning of the measure 
that contains this time location.

4

5

Press the [PLAY] key to begin recording.
When you are ready to perform, press the [PLAY] key 
to begin recording. Playback will cue the specified 
number of measures (Count-In) before the current 
location. When playback comes to the measure of the 
current location, it will automatically switch to record-
ing mode. After the specified number of recording 
measures (RecLngth), recording will automatically 
switch back to playback.

6

Multiple tracks of recorded data can be combined into one 
or two tracks. At this time you may also preserve the 
recorded data of the tracks that were combined. This oper-
ation is called “bounce.” You can use this when the 
recorded data you want to play back occupies more than 
four tracks.

Combining tracks 1–4 onto two tracks
Here’s how the audio of tracks 1–4 can be overwritten 
onto tracks 1 and 2.

1

Select Bounce mode.
Hold down the [SHIFT] key and press the [LOCATE] 
key to switch the “BOUNCE” setting to “4

→

2” (4 

track 

→

 2 track mode).

2

Select the tracks that will be recorded.
Press the [REC SELECT] keys for the tracks that will 
be recorded (1 and 2), adding a “

” symbol to the 

track number.

3

Adjust the pan of the playback tracks.
Press the [PLAY] key to play back, and adjust the ste-
reo position of tracks 1–4. (

If you are using only one recording destination track, set the 
pan to the far right if you are bouncing to track 1 or 3, or to 
the far left if you are bouncing to track 2 or 4. In this case, the 
monitor sound will also be panned all the way to one side,