Panasonic SX-KN7000 User Manual

Tone Edit

Modify the separate tones which comprise the sound.

About tones

A sound may be made up of at most four tones.

• A special process is used to produce real-

sounding piano type tones. For this reason,
some edit procedures for piano sounds, FIL-
TER or AMPLITUDE for example, may differ
from those for other sounds.

TONE SELECT

On the SOUND EDIT menu, select TONE.

• The display looks similar to the following.

Use the buttons to the left of the display to
select the tone you wish to edit (1st, 2nd, 3rd,
4th).

• Use the ON/OFF buttons to select ON or OFF.

Select a sound for the tone.

• Use the GROUP

∧

and

∨

buttons to select the

group, and the TONE NAME

∧

and

∨

buttons

to select the sound.

• A “

” mark in the TONE DYNAM column indi-

cates that a TONE DYNAMICS change was
made to the sound.

Use the LEVEL

∧

and

∨

buttons to adjust the

volume.

Use the KEY

∧

and

∨

buttons to set the pitch

of the output sound.

Use the DETUNE

∧

and

∨

buttons for fine

adjustment of the pitch deviation.

Use the PANNING

∧

and

∨

buttons to adjust

the stereo balance.

• PAN: CTR is the center point. At L64, the

sound is all the way to the left, at R63 all the
way to the right.

• If STEREO R or STEREO L is selected for the

MODE, the balance is fixed (cannot be
moved).

Use the DELAY

∧

and

∨

buttons to adjust the

delay time of the sound.

• The higher the number, the longer the delay

before sound output.

Use the TRIGGER

∧

and

∨

buttons to select

a trigger mode.

KEY ON:

The normal mode, in which sound is emitted
when the key is played.

KEY OFF:

Sound is emitted when the key is released (like
muted strings, for example).

LEGATO:

Sound is emitted only when the key is played
legato.

NON LEG:

Sound is not emitted when the key is played
legato.

PEDAL:

The sound is produced only while the SUS-
TAIN button is on.

SOUND

1st tone

3rd tone

2nd tone

4th tone

d E

Part X

Sound Edit

166

QQTG0671